| OH2 |
HPP |
The HPP pumps are designed and manufactured according to API 610, 11th edition and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry. Designed to run at |
|
|
| OH2 |
PEP |
Radially split single stage centrifugal pumps having constructive features identical to the HPP line, with the exception of the open impeller. The specific construction allows the pump to run with no back-flow, with a totally stable curve and with ve |
|
|
| OH2 |
DUAL PEP |
Patented two stages overhung pump using two low flow design impellers in back to back configuration enclosed in a radially split, barrel shaped, centerline supported integral casing, maintaining the end - top nozzle configuration. Dual PEP pump meets |
|
|
| VS4 |
V-PEP |
The pumps belonging to the V-PEP series are API 610 compliant vertically suspended, single casing volute, line shaft driven VS4 type centrifugal sump pumps suitable for small capacity and medium to high head, ranging from less than 1 up to 35 m³ |
|
|
| VS2-VS7 |
C2KV |
C2KV and C2KV-N pumps are double suction twin volute vertical wet pit pumps specifically designed for oil pipelines and petro-chemical applications. They are designed according to API 610, latest edition norms. Thanks to their specific construction, |
|
|
| VS1-VS6 |
HPVT |
HPVT are vertically-suspended, multi-stage centrifugal pumps designed and built in full accordance with API 610 norms.
Available either in VS1 or VS6 configurations, depending on the characteristics of the pumped liquid and given conditions of |
|
|
| VS4 |
HPV |
API 610 vertically suspended, single casing volute, line shaft driven VS4 type, sump pump. Single piece shaft in standard construction. Line bearings available in different materials, depending on pumped fluid an operating conditions. Either oil or g |
|
|
| BB3 |
HPM |
HPM process pumps are two-stage, axially split, volute type pumps with single or double suction 1st stage impeller, fully designed according to latest edition of API 610 Std. Casing is axially split; suction and discharge nozzles are integrally cast |
|
|
| BB2 |
HPD - HPE - HPE-DS |
Single and two stage between bearing process pumps designed and manufactured according to API 610, 11th ed.
HPD are single stage double suction radially split casing pumps.
HPE are two stage pumps with either single or double suction fir |
|
|
| VS1-VS6 |
CKVN |
CKVN - CKVN-B are vertically-suspended, single or multi-stage centrifugal pumps (VS1 or VS6 configuration), designed and built in full accordance with API 610 norms. Bowls are integrally cast diffuser type to assure optimum hydraulic efficiency and m |
|
|
| OH3 |
LHVN |
LVN and LHVN are process pumps, single stage, vertical in-line overhung type, (OH3 and OH4 configurations), fully complying with API 610 Std. (ISO 13709), latest edition. The pump casings are radially split, with in-line nozzle arrangement. Larger si |
|
|
|
HPMB |
The HPMB line barrel pumps are multi-stage, designed and manufactured according to API 610, XI edition, and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry, for power plant boiler feed water, water inj |
|
|
| OH3 |
L-BPEP |
The L-BPEP is a two stages overhung pump using two low flow design impellers in back to back configuration enclosed in a radially split.
Nozzle arrangement available in several configurations.
The L-BPEP meets API 610 11 |
|
|
| OH2 |
PEPMD |
HPPMD and PEPMD pumps are designed and manufactured in full accordance with the API 685 (Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry, 1st edition October 2000) norms. Hydraulics are directly derived from the API 610 |
|
|
| OH2 |
HPPMD |
HPPMD and PEPMD pumps are designed and manufactured in full accordance with the API 685 (Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry, 1st edition October 2000) norms. Hydraulics are directly derived from the API 610 |
|
|
| OH3 |
L-PEP |
L-PEP centrifugal process pumps are single stage overhung radially split casing (OH3 configuration) pumps, specifically conceived and designed for heavy duty applications in the oil and gas and petrochemical industry, in order to complete |
|
|
| BB1 |
C2POH |
C2PO heavy duty process pumps are horizontal, between bearings, with axially split casing, double suction, one stage impeller (BB1 configuration) , in full compliance with API 610 std., latest edition (ISO 13709). The specific pump construction allow |
|
|
| TRIPLEX |
NF 50 |
Triplex plunger pumps according to API 674 norms
Stroke: 60 mm
Plunger design load: 1952 Kg
Maximum power at shaft end: 36.7 Kw
Approximate weight *: 290 Kg
Suction and discharge connections are available on both sid |
|
|
| TRIPLEX |
NH 77 |
Triplex plunger pumps according to API 674 norms
Stroke: 68 mm
Plunger design load: 2885 Kg
Maximum power at shaft end: 56.5 Kw
Approximate weight *: 355 Kg
Suction and discharge connections are available on both sid |
|
|
| TRIPLEX |
NJ 116 |
Triplex plunger pumps according to API 674 norms
Stroke: 78 mm
Plunger design load: 4134 Kg
Maximum power at shaft end: 85.2 Kw
Approximate weight *: 540 Kg
Suction and discharge connections are available on both sid |
|
|