(+39) 039 99821
Subfamily Name Short Description Image
OH2 HPP The HPP pumps are designed and manufactured according to API 610, 11th edition and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry. Designed to run at
  • hpp
OH2 DUAL PEP Patented two stages overhung pump using two low flow design impellers in back to back configuration enclosed in a radially split, barrel shaped, centerline supported integral casing, maintaining the end - top nozzle configuration. Dual PEP pump meets
  • DUAL PEP
VS4 V-PEP The pumps belonging to the V-PEP series are API 610 compliant vertically suspended, single casing volute, line shaft driven VS4 type centrifugal sump pumps suitable for small capacity and medium to high head, ranging from less than 1 up to 35 m³
  • V-PEP
VS1-VS6 HPVT HPVT are vertically-suspended, multi-stage centrifugal pumps designed and built in full accordance with API 610 norms.
Available either in VS1 or VS6 configurations, depending on the characteristics of the pumped liquid and given conditions of
  • HPVT
VS4 HPV API 610 vertically suspended, single casing volute, line shaft driven VS4 type, sump pump. Single piece shaft in standard construction. Line bearings available in different materials, depending on pumped fluid an operating conditions. Either oil or g
  • HPV
BB3 HPM HPM process pumps are two-stage, axially split, volute type pumps with single or double suction 1st stage impeller, fully designed according to latest edition of API 610 Std. Casing is axially split; suction and discharge nozzles are integrally cast
  • HPM
BB2 HPD - HPE - HPE-DS Single and two stage between bearing process pumps designed and manufactured according to API 610, 11th ed.
HPD are single stage double suction radially split casing pumps.
HPE are two stage pumps with either single or double suction fir
  • HPD - HPE - HPE-DS
VS1-VS6 CKVN CKVN - CKVN-B are vertically-suspended, single or multi-stage centrifugal pumps (VS1 or VS6 configuration), designed and built in full accordance with API 610 norms. Bowls are integrally cast diffuser type to assure optimum hydraulic efficiency and m
  • CKVN
OH3 LHVN LVN and LHVN are process pumps, single stage, vertical in-line overhung type, (OH3 and OH4 configurations), fully complying with API 610 Std. (ISO 13709), latest edition. The pump casings are radially split, with in-line nozzle arrangement. Larger si
  • LHVN
OH3 L-BPEP The L-BPEP is a two stages overhung pump using two  low flow design impellers in back to back configuration  enclosed in a radially split. 
Nozzle arrangement available in several configurations.
The L-BPEP meets API 610 11
  • L-BPEP
OH2 PEPMD HPPMD and PEPMD pumps are designed and manufactured in full accordance with the API 685 (Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry, 1st edition October 2000) norms. Hydraulics are directly derived from the API 610
  • PEPMD
OH2 HPPMD HPPMD and PEPMD pumps are designed and manufactured in full accordance with the API 685 (Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical and Gas Industry, 1st edition October 2000) norms. Hydraulics are directly derived from the API 610
OH3 L-PEP L-PEP centrifugal process pumps are single stage overhung radially split casing (OH3 configuration) pumps,  specifically conceived and designed for heavy duty applications in the oil and gas and petrochemical industry,  in order to complete
  • L-PEP
BB1 C2POH C2PO heavy duty process pumps are horizontal, between bearings, with axially split casing, double suction, one stage impeller (BB1 configuration) , in full compliance with API 610 std., latest edition (ISO 13709). The specific pump construction allow
  • C2POH
TRIPLEX NF 50 Triplex plunger pumps according to API 674 norms
Stroke: 60 mm
Plunger design load: 1952 Kg
Maximum power at shaft end: 36.7 Kw
Approximate weight *: 290 Kg
Suction and discharge connections are available on both sid
  • NF 50
TRIPLEX NH 77 Triplex plunger pumps according to API 674 norms
Stroke: 68 mm
Plunger design load: 2885 Kg
Maximum power at shaft end: 56.5 Kw
Approximate weight *: 355 Kg
Suction and discharge connections are available on both sid
  • NH 77
TRIPLEX NJ 116 Triplex plunger pumps according to API 674 norms
Stroke: 78 mm
Plunger design load: 4134 Kg
Maximum power at shaft end: 85.2 Kw
Approximate weight *: 540 Kg
Suction and discharge connections are available on both sid
  • NJ 116
TRIPLEX TD 18 Triplex plunger pumps according to API 674 norms
Stroke: 34 mm
Plunger design load: 1670 Kg
Maximum power at shaft end: 13.2 Kw
Approximate weight *: 116 Kg
Suction and discharge connections are available on both sid
  • TD 18
TRIPLEX TN 260 Triplex plunger pumps according to API 674 norms
Stroke: 125 mm
Plunger design load: 9025 Kg
Maximum power at shaft end: 191.1 Kw
Approximate weight *: 2700 Kg
Suction and discharge connections are available on both
  • TN 260
MAGDRIVE HCMD Single volute hermetically sealed pump thanks to the replacement of the traditional mechanical seals with magnetic device.This solution allows a substantial reduction of maintenance interventions and, consequently, of the running costs. All the parts
  • HCMD


Business Divisions

Enginered Solutions

Industrial and Power Solutions: centrifugal

Industrial and Power Solutions: vacuum

Aftermarket

Contact Us
  Finder Pompe S.r.l.

Via Bergamo 65 - 23807 Merate
(Lc) - Italy
P.IVA IT00184130136

Tel : (+39) 039 99821

Copyright © 2015 - www.finderpumps.com

  • dover-logo
  • Finder is a Dover Company